+91 971-858-8800
ABAlco-M is a high quality yeast strain designed for higher alcohol yield from cane sugar molasses. ABAlco-M is suitable for use in production of beverage, industrial and fuel grade ethanol differentiated by faster budding, increased fermentation rate and reduced fermentation cycles, tolerance to higher alcohol concentrations and high gravity fermentation.
| PHYSICAL STATE | GRANULAR POWDER |
|---|---|
| Color | Tan –pale beige |
| Odour | Mild yeasty |
| Optimum pH | 4.5 – 5.5 |
| Optimum temperature | 30 to 40 degree Celcius |
| Dosage range | 5 – 6 kg/ 100,000 liters of wash |
| Tolerance to sugar content | ≤ 15% |
| Ethanol tolerance | ≤ 16% |
ABAlco-M has the following benefits :
1. Works on cane sugar molasses.
2. High gravity fermentation.
3. Rapid fermentation rate.
4. Higher alcohol yield.
5. Very low volatile production.
6. Tolerant to higher sugar content up to 15%.
7. Tolerant to higher alcohol concentration up to 16%.
8. Higher temperature tolerance up to 40 C.
9. Tolerant to process deviations.
ABAlco-M is suitable for use under typical fermentation conditions. Under optimum conditions of pH 4.5 – 5.5 and temperature 30 – 40 C the recommended dosage is 5 – 6 kg/ 100, 000 liter of wash or fermenter mash.
ABAlco-M has to be rehydrated in luke warm water of about 35 – 400 C for 15b minutes. It is then acclimatized by adding this solution to pre-fermenter media for 15 minutes before mixing with the fermenter media.
ABAlco-M is available in 10 kg foil pack.
ABAlco-M should be stored in cool and dry environment below 25 C. The product should be contained in a sealed package. ABAlco-M is stable for 12 months under these conditions.
AB Bioscience is a leading manufacturer and supplier of a Distillery chemical.
Copyright © 2023, AbBioscience. | All Rights Reserved